Professional Manufacturer of Gas Cookers and Gas Hobs

Bottom shell and panel

Professional Design & Excellent Manufacturing

• The material of bottom shell is generally stainless steel, it can also be replaced according to customer needs, and the vacant parts should match the burner size and knob size.
• Several choices on top panel: Stainless steel(201,#304)/Tempered glass/Enamel
• Distortion and chromatic aberration are not allowed because of the exquisite technology.

Burner and Brass Cap

Casting Integration & Precise Process

• Normal burner size: 90mm(single/double tube),100mm, 120mm
• Burner type:Italy SABAF burner/Chinese style; their highest temperature resistance: 550 degrees/530 degrees
• 1#-4#:Triple Ring Burner:3.3kw/Rapid Burner:3.0kw/Semi-rapid Burner:1.75 kw/Auxiliary Burner:1.0 kw
• Burner cap’s reasonable diversion design for more efficient gas combustion and energy-saving.
• Our burner cap has a uniquely designed flow guide to optimize gas combustion and improve energy efficiency
• High temperature resistant aluminum alloy castings ensure superior durability and performance.

Ignition Valve

CNC Process to ensure the accuracy for Perfect Qualify of Products

• High technology ensures that our products meet the highest standards of the safety, reliability and durability.
• Faster igniting time(3-5 seconds) and faster shut-off time and shorter blockage times(5-10 seconds) for more safety.

Ignition valve leakage

Make sure the valve body and spool do not leak.

• The leak detector is well connected with the intake pipe
• Press the valve body down to the bottom with your hand（open the solenoid valve）
• Start the leak detector, read the results after it stop, the result should be ≤.0.25ml/min
• Turn the valve body to the maximum fire position, release, start the leak detector, wait for the leak detector to stop, read the results(≤.0.5ml/min)

Gas pipe leakage

Make sure that there is no air leakage in each gas pipe.

• Connect the leak detector hose to the air inlet connector, start the leak detector and read the test result after the leak detector stops. The result should be≤0.7ml/min.

Visible Flame leakage

Make sure that there is no gas leakage in each joint.

• Open the stove from the gas inlet to the fire hole, set the gas pressure to 1.5 times the rated pressure.
• Use visible flame(Pressure: 1.5pa) to detect whether there is any leakage from gas inlet to fire hole.

Flatness of pan support testing

Make sure that each pan support fits well with the stove body.

• Smooth surface and no burrs
• The ear height of pan support ≤1mm
• The pot is stable and the circle diameter is even
• The welding of the pan support is firm and there is no deformation.
• Place the pan support on top of the panel, it should not shake, radial clearance≤2mm.

Package

• Appropriate protection can improve the quality of shipment and the sales of the products.